PAT-Core lower plunger configurator

PAT-Core: Lower Plunger Configurator

Use our configurator to determine the proper lower plunger for your battery test.

By default, the lower plunger serves as the positive current collector . The choice of materials is the same as for the upper plunger, however, the lower plunger comes in different sizes (height numbers) to account for different thicknesses of the lower electrode and the separator. Available height numbers range between 50 and 800 in steps of 50 μm. The proper plunger height must be chosen to ensure that the pre -assembled separator is not excessively bent during assembly of the PAT -Core. The proper height number depends on both the thickness of the lower electrode and the thickness of the built -in separator. Please note that the height number does not refer directly to the height of the lower electrode in μm.

Request a quote:

    Form of address (required)

    Your name (required)

    Your company

    Your email address (required)

    Subject (required)

    Your message


    We are using cookies to give you the best experience on our site. By continuing to use our website without changing the settings, you are agreeing to our use of cookies. More Info

    The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.